HDPE Silicon core pipe

HDPE Silicon core pipe is a new compound pipeline that the inside wall with silicone solid lubricant, called silicone tube. It is synchronous composite and extrusion by three plastic extrusion machine, the main raw materials for high-density polyethylene, CORE for solid lubricant silicone quality of the lowest friction coefficient. Widely used for optical cable communication network systemThe properties with HDPE silicon core pipe: 1, it is solid for the silicon sandwich wall, permanent lubrication, and the inner core in silicon friction characteristics remain unchanged. The repeated extraction within cable channels; 2, it is simultaneously squeezed into high-density polyethylene pipe wall for the inner wall of the silicon sandwich, and evenly distributed throughout the pipe wall, they have the same physical and mechanical properties both the inside wall of the silicon sandwich and high-density polyethylene, not falling off, the detachment, and having the same life with the silicone tube; 3, the inner wall of the silicon sandwich is not reacting with water, accidents can wash with water pipeline; 4, it is small for the radius of curvature the silicon core pipe (10 times its diameter). If it encountered the bending and gap when buried the Pipe, with the environment terrain can be determined without any treatment, not one based Wells transition; 5. It can be made of arbitrary about the length of the silicon core tube of each root (Pan). Under normal circumstances, it is from the transport safety and convenience of construction and other considerations, The standard length of silicon core pipe of each root(Pan) is 2,000 meters; 6, construction convenient, the working cost is reduced a lot. Silicone tube without the coat manager, and will also direct use the cable within the pipe, no need the branch. Since the length of each disc silicon core pipe is 2,000 meters, the well people located at one of each 1,000 meters. Used the gas blowing when wears the cable, each 1,000 meters just 15 minutes. Appearance:High-density polyethylene (HDPE) pipe and outside the silicon core wall should be clean, smooth and does not allow any air bubbles, it is obvious scratch, dents, impurities, defects such as uneven color. End tube should be cut formation, and the vertical axis with the management. Silicone wall should closely Weld, no exonerate phenomenon. The pipe wall is clear for labeling. Usage: Outdoor communication cables and cable pipeline system, the public information network, the public transport system, Cable networks and highway communications and other projects.